|Home||» Products||» Self Cleaning Filters||» GRP Auto Self Cleaning Filters|
The ASC-Filter range from DM Engg, works based on Bernoulliâs principle. ASC filters are equipped with a timer circuit and a differential pressure switch. The filter continues itâs operation until preset timer value is reached or a differential pressure value is reached.
The filter enters into cleaning mode on trigger by any of these two inputs. On receiving signal the control panel opens the auto drain valve and after short interval, a piston fitted with a sweeping disk in a closed filter chamber is moved up and down. This action creates low pressure and high pressure zones inside the same vessel due to varied velocities between moving disk and filter screens.
As a result of this flow reversal takes place dislodging the clogged impurities from the filter screens. Once the piston completes cleaning cycle the drain valve is automatically closed and filter resumes next cycle.
The USP of DM enggâs ASC filter is it continues to filter inlet stream while the cleaning is in progress.
Salient features of ASC filters form DM Engg.
The filter vessel can be produced of stainless steel, carbon steel (with or without inner lining) or glass fibre reinforced plastic (GFK).
The filter insert can be supplied made of stainless steel, titanium or Super Duplex materials, PP. Other material can be supplied upon request.
Filter Medium Material
Flow Rate (cubic meters/hr)